Adding chemicals to your hot tub and not sure when it’s safe to get in? Wait times vary by chemical – shock needs 20-30 minutes minimum, while pH and alkalinity adjusters need at least 30 minutes with jets running. This guide gives you the specific numbers for each chemical type so you’re not just guessing.
A strong chlorine smell from your hot tub usually isn’t caused by too much chlorine – it’s caused by chloramines, which form when chlorine bonds with sweat, oils, and other contaminants. Shocking the water breaks chloramines apart and gets rid of the smell. This post explains what’s happening and exactly how to fix it.
A party puts serious stress on hot tub water. Body oils, lotions, sweat, and drinks can crash your sanitizer and throw your pH sideways within an hour. This guide walks you through exactly what to test and fix, in what order, so your tub is clean and safe again fast.
A hot tub party can wreck your water chemistry in one evening if you go in unprepared. The fix is a simple before-during-after routine: pre-treat your water, set chemical levels higher than normal, and shock immediately after everyone clears out. Here’s exactly how to do it.