Itchy skin after soaking is one of the most common hot tub complaints, and it almost always comes down to water chemistry. The fix depends on which problem you have: too much sanitizer, too little, wrong pH, or a biofilm issue lurking in the plumbing. This article walks through each cause and what to do about it.
Adding chemicals to your hot tub and not sure when it’s safe to get in? Wait times vary by chemical – shock needs 20-30 minutes minimum, while pH and alkalinity adjusters need at least 30 minutes with jets running. This guide gives you the specific numbers for each chemical type so you’re not just guessing.
Foamy hot tub water is almost always caused by something that shouldn’t be in the water: body lotion, detergent residue, or a chemistry imbalance. This guide walks you through the real causes and how to clear foam fast, without draining unless you have to.
Itchy skin after a hot tub soak almost always points to a water chemistry problem – usually pH that’s off, sanitizer that’s too high, or low calcium hardness. The fix is straightforward once you know what you’re actually dealing with. This guide walks through every common cause and what to do about each one.
Itchy skin after a hot tub soak is almost always a water chemistry problem – usually pH out of range, excess chlorine or bromine, or a dirty filter. This post walks you through how to find the real cause and fix it before your next soak.
A bad smell from your hot tub almost always points to a specific chemical or biological problem – and the smell itself tells you which one. This guide walks through the most common hot tub odors, what each one means, and exactly how to fix it. No guessing required.
Itchy skin after using your hot tub is almost always a water chemistry problem – pH out of range, sanitizer levels too high, or a biofilm issue hiding in your plumbing. This guide walks through each cause and the specific fix for each one so you can stop guessing and start soaking comfortably again.
Cloudy hot tub water usually comes down to four culprits: low sanitizer, unbalanced pH or alkalinity, high calcium hardness, or a clogged filter. Testing your water and working through the causes in order will clear it up faster than dumping in clarifier and hoping for the best.