A dirty hot tub filter is the number one cause of cloudy water and poor circulation — and most owners clean theirs too rarely or with the wrong method. This guide covers the exact rinse, chemical soak, and replacement schedule that actually keeps your filter working. No guesswork, just a clear routine.
A hot tub cover typically lasts 5 to 7 years, but most fail early because of neglect, not wear. Monthly cleaning, UV protectant, and balanced water chemistry are the three biggest factors. This guide covers exactly what to do, how often, and what mistakes to avoid.
Using your hot tub through a cold winter is one of the best things about owning one – but cold temps change how your water behaves and put extra stress on your equipment. This guide covers the specific adjustments that matter most when the temperature drops below freezing.
A hot tub that won’t heat is one of the most frustrating problems you can run into. Most causes are fixable without a service call if you know where to look. This guide walks through the common culprits and how to check them in order.
If your hot tub pH keeps creeping up no matter how much pH decreaser you add, the problem is almost never the pH itself – it’s usually high total alkalinity or aeration. This post explains why pH rises in hot tubs, how to find the actual cause, and what to do about it for good.
Keeping a hot tub clean doesn’t require hours of work each week. A simple, consistent routine — test twice a week, add chemicals as needed, rinse your filter monthly — handles 90% of problems before they start. This guide breaks it down into the smallest possible effort that still actually works.
Bromine and chlorine are both effective hot tub sanitizers, but they have real practical differences that affect how you dose, test, and maintain your water. This guide covers what those differences mean day-to-day so you can pick the right one and stick with it.
Most hot tub owners spend 15 to 30 minutes per week on water care once they settle into a routine. This article breaks down exactly where that time goes – testing, dosing, filter rinses, and the bigger monthly tasks – so you can plan realistically and avoid the mistakes that turn a quick task into a two-hour water rescue.
A bad smell from your hot tub almost always points to a specific chemical or biological problem – and the smell itself tells you which one. This guide walks through the most common hot tub odors, what each one means, and exactly how to fix it. No guessing required.
If your hot tub tests at zero sanitizer an hour after you add chemicals, something is consuming it faster than it can work. The usual culprits are high bather load, out-of-range pH, low cyanuric acid, or biofilm hiding in your plumbing lines. This post walks through each one so you can find your actual problem.