Your blog category
Summer sun is one of the most underrated threats to a hot tub. UV exposure fades acrylic shells, cracks pillows, and degrades water chemistry faster than cool-weather use. This guide covers exactly how to slow that damage down.
Hot tubs are not hard to maintain, but they do require consistency. Most owners spend 20-30 minutes a week on upkeep once they have a routine dialed in. The problems start when people skip steps or wait too long between checks.
Itchy skin after a hot tub soak almost always points to a water chemistry problem – usually pH that’s off, sanitizer that’s too high, or low calcium hardness. The fix is straightforward once you know what you’re actually dealing with. This guide walks through every common cause and what to do about each one.
A strong chlorine smell from your hot tub usually isn’t caused by too much chlorine – it’s caused by chloramines, which form when chlorine bonds with sweat, oils, and other contaminants. Shocking the water breaks chloramines apart and gets rid of the smell. This post explains what’s happening and exactly how to fix it.
Not every hot tub chemical has the same wait time before it’s safe to soak. This guide gives you specific, chemical-by-chemical wait times so you’re not guessing. From shock to pH down, here’s exactly how long to hold off.
A dirty hot tub filter is the most common cause of cloudy water and poor sanitizer performance. This guide covers the rinse, soak, and replacement schedule every hot tub owner needs, plus the mistakes that shorten filter life.
A hot tub cover usually fails long before it should – not from wear, but from neglect. Regular cleaning, UV protection, and keeping your water chemistry balanced can easily double a cover’s lifespan. This guide covers exactly what to do and how often.
Running a hot tub in winter takes a little more attention than summer, but it’s completely doable. The biggest risks are frozen plumbing, heat loss, and chemistry going sideways from temperature swings. This guide covers the practical fixes for all three.
A hot tub that won’t heat is frustrating, but most causes are things you can check yourself in under 20 minutes. This guide walks through the most common reasons a hot tub heater stops working and what to look at first before spending money on a service call.
If your hot tub pH keeps drifting upward no matter how much pH decreaser you add, you’re not alone. The cause is almost always high total alkalinity, aeration from jets and air blowers, or both. This post explains why it happens and what to actually do about it.