Swim and Soak Cloudy hot tub water has a short list of causes, and most of them are fixable in under an hour. This guide ranks them by how often they actually happen and walks you through each fix with specific numbers – no guesswork required.
Getting your hot tub chemistry right at startup sets the foundation for every soak after it. This guide walks you through the exact sequence, the right target numbers, and the mistakes most first-timers make before they ever get in.
Foamy hot tub water is almost always caused by contaminants like soap, lotion, or body oils mixing with your water and jets. This guide explains exactly what causes hot tub foam and the fastest ways to get rid of it for good.
The first week with a new hot tub sets the tone for everything after it. Get your chemistry dialed in, learn your testing rhythm, and build a few simple habits early and you will rarely deal with a real problem. This guide walks you through it day by day.
A party puts serious stress on hot tub water. Body oils, lotions, sweat, and drinks can crash your sanitizer and throw your pH sideways within an hour. This guide walks you through exactly what to test and fix, in what order, so your tub is clean and safe again fast.
Summer sun is one of the fastest ways to wreck your hot tub chemistry. UV radiation burns off sanitizer, heat accelerates chemical reactions, and an uncovered tub in direct sunlight can lose its entire chlorine reading in hours. This post breaks down exactly what’s happening and how to fight back.
Hot tubs aren’t as hard to maintain as people fear, but they do require a consistent weekly routine. This post breaks down exactly what that looks like, what trips people up, and how to keep your water clear without spending hours on it.
Itchy skin after a hot tub soak is almost always a water chemistry problem – usually pH out of range, excess chlorine or bromine, or a dirty filter. This post walks you through how to find the real cause and fix it before your next soak.
A strong chlorine smell from your hot tub is almost always a sign of chloramines – combined chlorine that forms when sanitizer reacts with body waste. Ironically, it usually means you need MORE sanitizer, not less. This post explains the chemistry and exactly how to fix it.
The wait time after adding hot tub chemicals is not one-size-fits-all. Some chemicals are safe after 15 minutes with the jets running; others need hours. This guide breaks it down chemical by chemical so you’re not guessing.