Cloudy hot tub water is one of the most common problems hot tub owners run into, and it almost always traces back to one of three things: chemistry, filtration, or bather load. This guide walks you through how to diagnose the cause and clear it up fast, without guessing.
Setting up a new hot tub correctly from the first fill prevents months of water problems. This guide walks through every chemical step in the right order, with specific targets and common mistakes to avoid before you ever step in.
Foam in your hot tub is almost always caused by contaminants like body oils, lotions, and detergent residue reacting with the water. You can knock it down fast with an anti-foam product, but fixing the root cause is what keeps it from coming back. Here’s the full breakdown.
The first week with a new hot tub sets the tone for everything that follows. This practical day-by-day guide covers what to test, what to adjust, and how to build habits that keep your water clean without making it a part-time job.
A hot tub party can wreck your water chemistry in one evening if you go in unprepared. The fix is a simple before-during-after routine: pre-treat your water, set chemical levels higher than normal, and shock immediately after everyone clears out. Here’s exactly how to do it.
Spring startup is one of the easiest things to get wrong — and one of the most satisfying to get right. This guide walks you through the exact steps to flush, drain, refill, and rebalance your hot tub after winter so you’re soaking safely within a day or two.
Hot tubs aren’t especially hard to maintain, but they do punish neglect fast. This post breaks down the real weekly effort, the things that catch new owners off guard, and how to build a routine that keeps problems from piling up.
Itchy skin after using your hot tub is almost always a water chemistry problem – pH out of range, sanitizer levels too high, or a biofilm issue hiding in your plumbing. This guide walks through each cause and the specific fix for each one so you can stop guessing and start soaking comfortably again.
A strong chlorine smell in your hot tub is almost never caused by too much chlorine. It’s usually chloramines, which form when sanitizer reacts with contaminants brought in by bathers. The fix is shocking the water, not adding less chlorine.
Different hot tub chemicals require different wait times before you can safely soak. Some need 15 minutes, others need overnight. This guide gives you the specific wait times for every common chemical so you stop guessing.