Swim and Soak A hot tub cover usually fails long before it should – not from wear, but from neglect. Regular cleaning, UV protection, and keeping your water chemistry balanced can easily double a cover’s lifespan. This guide covers exactly what to do and how often.
Running a hot tub in winter takes a little more attention than summer, but it’s completely doable. The biggest risks are frozen plumbing, heat loss, and chemistry going sideways from temperature swings. This guide covers the practical fixes for all three.
A hot tub that won’t heat is frustrating, but most causes are things you can check yourself in under 20 minutes. This guide walks through the most common reasons a hot tub heater stops working and what to look at first before spending money on a service call.
If your hot tub pH keeps drifting upward no matter how much pH decreaser you add, you’re not alone. The cause is almost always high total alkalinity, aeration from jets and air blowers, or both. This post explains why it happens and what to actually do about it.
You can keep a hot tub clean and safe in about 15 minutes a week if you follow a stripped-down routine focused on the things that actually matter. This guide gives you the shortest path to clear, comfortable water without turning hot tub ownership into a hobby.
Bromine and chlorine are both effective hot tub sanitizers, but they’re not interchangeable. Bromine holds up better in hot water and is gentler on skin, while chlorine works faster and costs less. Which one is right depends on how you use your tub and how much maintenance you want to do.
Most hot tub owners spend 15 to 30 minutes per week on water care, plus about 2 to 3 hours every 3 to 4 months when it’s time to drain and refill. This post breaks down every task by how long it actually takes, so you can plan your schedule around it instead of being surprised by it.
A bad smell in your hot tub almost always points to one specific problem, and the type of smell tells you exactly where to look. This guide matches each odor to its cause and gives you a direct fix. Most problems resolve in under an hour.
Adding sanitizer to your hot tub but the reading drops to zero within hours? This is one of the most common – and most frustrating – hot tub problems. The cause is almost always one of a handful of things: high demand from organic contamination, biofilm in your plumbing, pH out of range, or a stabilizer problem. Here’s how to figure out which one you’re dealing with.
Total alkalinity controls how stable your hot tub’s pH stays. Get it wrong and nothing else in your water works right. This guide covers the correct target range, how to adjust it step by step, and the mistakes most new owners make.